Descaling machine

Descaling machine

New
Descaling & Flushing system with an extremely powerful pump to flush out the stubborn Scale / Rust / Deposits formed on Cooling Channels.

Descaling & Flushing system with an extremely powerful pump to flush out the stubborn Scale / Rust / Deposits formed on Cooling Channels. Timer controlled operations – safe to use, prevent excessive contact of chemicals with cooling channels Auto cut-off heater maintains optimum temperature for best results. When producing products, the mold pipeline needs to be filled with cooling media (like water, steam and heat conducting oil) to control the temperature of mold.

As the mold cooling pipe is always working in the situation of high frequency alternating between hot and cold, so scale, carbon deposition and rust are formed easily on the inner wall of the mold cooling pipe. Bacteria and algae multiply in large quantities as nutrient concentration. All of this makes the pipe diameter getting smaller and smaller or completely blockage which causes the heat exchange efficiency to reduce greatly.

With a worse heat exchange efficiency the quality of product is unstable and the defect rate is rising which means the production costs are increased. Our DSP25 system helps you save a lot by increasing the cooling efficiency of Cooling Channels of Dies & Moulds, Injection moulding machines, Heat exchangers, Boilers, Central Heating / Cooling plumbing.

Great support For All Customers

  • Head Office (Delhi)

    B-152, Mayapuri Industrial Area, Phase-1, New Delhi, 110 064, India
    T: 011 43738825
    M: +91 98102 99598
    E: plassteze@plassteze.com

  • Pune Office

    M: +91 9958100847
    E: pune@plassteze.com

  • Chennai Office

    M: +91 99581 00895
    E: chennai@plassteze.com

  • Gujrat Office

    M: +91 99581 00527
    E: guj@plassteze.com