Single Fluted Deep Hole drilling Tool

• Suitable for almost every material, from Ø2-40.0m, max. total length 3000mm
• Drilling depth more than 10×D High drilling performance Precision roundness.

Two Fluted Deep Hole Drill with solid carbide tools

• suitable for cast iron, aluminium and short-chipping non-ferrous metals, from Ø 6.0-27.0 mm, max. total length 1000 mm.
• Two Cutting Edges & Two Flutes.
• Faster production of holes.

Deep hole drilling accessories

• Gundrill guide bush, Whipguide bush, rubber bush.
• BTA-tube, BTA-guide bush, tube bush,
• Special spare parts on request.

Deep Hole drill regrind machine fixtures 

• Easy operation
• Three pointed chuck clamp
• Easy regrinding outer & inner cutting angle
• Easy operation by spring cam
• Spindle with ball bearings
• Stepless control of cam

Single Tube System

• Coolant oil fluid supply is fed through an oil pressure head between the outside of the drill tube and the hole wall.
• A seal between the workpiece and the drill bush is necessary.
• Double the coolant pressure and quantity are required than with the Ejector system.
• Preferably used for materials with long chip formation, such as stainless steel, low carbon steel and materials with an uneven structure.
•  Single tube system is more advantageous for extremely long workpieces.

Ground brazed BTA-head YM10

• Coating Available!  TiN, TiCN, TiALN