Features:

1. Use a sloping screw to adjust mould plate and parting locks, then turn 90 degrees. Parting locks can be closed up to 50,000 times

2. Easy to assemble and disassemble and cost efficient

3. Can also be installed into small, medium size, and 2-sectional injecting metal pipes, or can be installed on sliding bases

4. Mold weight < 100kg, using 4 pcs of 12ø

    Mold weight < 500kg, using 4 pcs of 16ø

    Mold weight < 1000kg, using 4 pcs of 20ø

    Mold weight > 1000kg, using atleast 6 pcs

5. Insert parting locks into die mould of about 3cm, then use H7 reamer to process mould hole within +0.1mm range

6. Process mould surface to the shape of the letter R. If processing to the chamfering of letter C, it will shorten its life cycle

7. Do not add any oil on parting locks, doing so will reduce the friction

COLOURS: White, Yellow, Orange