Mould Flipper

Mould Flipper

Now turning the large dies/moulds is safer and quicker. When any die/mould used in horizontal Injection moulding or Die Casting Machine is to be opened for maintenance, it requires to be turned 90 degrees first. Smaller moulds are easier to turn 90 degrees however when the moulds are very big and heavy, it's a very risky, time taking and laborious job. We have two solutions for this - 90-degree turn Table and 180-degree Mould Flipper.

 

FMG Series- 90 degree Turn Table

mould flipper                      

  • Electrical motor driven
  • Economical and free maintenance 
  • Occupy dedicated space to keep the table
  • Saves time, manpower and operator's fatigue

mould fliiper

 

Technical Parameters

Item/Type SXKH-5T SXKH-10T SXKH-15T SXKH-20T SXKH-30T SXKH-50T
Overturn capacity 5t 10t 15t 20t 30t 50t
Table Size 1250x1100 1400x1300 1650x1500 2000x1600 2200x1800 2500x2010
Table Height 605 730 730 860 985 985

External Dimension 

(length x width x height)

1700x1250x1750 1900x1400x2050 1900x1650x2250 2250x2000x2500 2600x2200x2800 2600x2200x3000
Centre Size 410 495 495 610 670 670
Motor Power 1.5KW 3KW 4KW 5.5KW 11KW 15KW
Machine Weight around 1.6t around 2.5t around 2.8t around 5.2t around 9t around 12t

 

 

 

FMG Series- 180 degree Mould Flipper

mould fliiper

  • Hydraulic cylinder driven, very safe to flip the mould by 90 degree
  • Saves time, manpower and Operator’s fatigue
  • The tables can rest at 180 degree
  • Does not require any dedicated space to keep the machine as the complete Hydraulic system can be accommodated in a pit and the mould maintenance can be done while the mould is kept on the table.

 

Technical Parameters

Type PFM5 PFM10 PFM15 PFM20 PFM30 PFM50
L(mm) 2800 3100 3600 3800 4200 6000
L1(mm) 400 400 500 500 500 700
H(mm) 350 450 450 530 530 630

W(mm)

1250 1400 1650 2000 2200 3000
A(mm) 1100 1300 1500 1600 1800 2600
Motor Power 1.5KW 3KW 4KW 5.5KW 11KW 18KW
Machine Weight(T) 4 4.5 5 8 11 14